Contact Us 24/7 for Fast and Reliable Plumbing Services

Ask John Toilet Bowl Won't Fill
Ask John Toilet Bowl Won't Fill

Why isn’t My Toilet Bowl Filling up After Flushing?

John Turpin is our resident home service repair expert here at Service Direct. He’s got the knowledge and experience to help homeowners like you make sense of most home repair issues. And with Service Direct, we connect you with top-tier service professionals to help with any repairs needed.

Toilet Not Filling With Water? Here’s Why!

When we get calls from customers in the immediate area, one of the most typical problems they report is that the toilet tank does not fill with water the way it should, and it often takes a few flushes to get the water out of the bowl.

The water supply in a toilet’s tank is intended to be replenished automatically whenever you flush the toilet. The water level needs to be less than an inch beneath the toilet’s overflow tube, while the refilling process ought to take approximately ten seconds. If a toilet does not fill up with water, this is an indication that a particular component within your toilet isn’t carrying out its function properly.

Toilet Bowl Not Filling
“Check out the common reasons your toilet bowl is not filling properly.

What Stops Your Toilet Bowl Filling up After Flushing

It might be really inconvenient to have a toilet which does not refill all the way. It will not only interfere with your toilet flushing correctly, but it also has the potential to cause the toilet to overfill or to use up a significant amount of water. Because it is not always simple to ascertain the reason why this issue is taking place, we have compiled a list of the many problems that might prevent the toilet from replenishing.

1. Incorrect Fill Valve/Float Setting

One of the most frequent causes of a toilet that doesn’t fully refill is an incorrectly set fill valve/float, which prevents the valve from staying open until the tank’s been sufficiently filled. After a flush, the tank’s fill valve opens, allowing water to enter the tank. Once the tank is empty, a float sends a signal to the valve to open, and the valve subsequently shuts when the toilet’s tank is full again.

The float will fall when the tank is almost empty, as is the case after a flush. The toilet’s fill valve will open when the float goes down. Once the tank reaches its capacity, the float rises again, closing its fill valve and preventing further refilling.

2. The Toilet Flapper Has Broken Sections

The flapper of a toilet is an elastic seal that prevents water from escaping from the tank into the bowl. When you flush a toilet, there’s a chain that lifts the flapper, allowing water to flow out and clean the bowl. The flapper’s ability to provide a tight seal might deteriorate with use. A little amount of water will leak out from the tank at all times, reducing the likelihood that there will be enough in the tank to fully fill the toilet bowl with each flush. Toilets with a worn flapper also need intermittent running, even when not in use, to allow the tank to refill.

If your flapper is leaking or otherwise worn out, you should replace it as fast as you can, even if it doesn’t seem like a major concern at the time. A leaking flapper may waste up to 200 gallons in water each day, which adds up to over 6,000 gallons of water over the course of a month and can significantly increase your water bill if left unchecked.

Our resident home repair expert, John Turpin, delves into the reasons behind your toilet not filling up after flushing and offers practical solutions and DIY tips to address the issue.

3. The Overflow Tube Is Broken

A toilet’s overflow tube will be the plastic pipe within the tank that leads to the toilet bowl. Its dual function is to keep the reservoir from flooding and to replenish the bowl with water after use. The tank refills as soon as the flapper is closed after a flush. When the water within the tank reaches the highest point of the toilet’s overflow tube, it flows in the tube and back into the bowl, restocking the tank.

A toilet’s overflow tube will be the plastic pipe within the tank that leads to the toilet bowl. Its dual function is to keep the reservoir from flooding and to replenish the bowl with water after use. The tank refills as soon as the flapper is closed after a flush. When the water within the tank reaches the highest point of the toilet’s overflow tube, it flows in the tube and back into the bowl, restocking the tank.

A steady drip of water inside the toilet bowl might be the consequence of a broken or cracked overflow tube. This might cause the tank to get too low to provide a complete flush of the toilet. Having a toilet bowl overflow due to a broken overflow tube is an even larger problem. If you see any signs of damage to the overflow tube, you should get it replaced right once.

4. Leaking or Cracked Toilet

There is a significant risk of expensive water damage from even a little leak within the toilet’s bowl or tank. Because of the constant loss of water, a leaking toilet requires regular refilling. Fortunately, leaks are generally simple to identify since water will pool around the toilet’s foundation. Loose bolts securing the tank to the bowl are the most frequent cause of a leaking toilet tank. Leaking from the bowl of your toilet indicates a fracture in the porcelain, which necessitates a new toilet.

5. Water Turnoff Valve Is Not Completely Open

Pay attention since when the water shutoff valve beside the toilet is just partially open, the bowl will never fully fill. In the event that your toilet isn’t refilling, this should be the first item you examine, since the valve might have been accidentally closed or bumped.

type-body-large spacing-20-bottom

6. You Have Weak Water Pressure

Your house may not have enough water pressure, which might cause the toilet to not refill. If the water pressure in your house is low, your toilet may shut off prior to it actually refilling, which is a problem that might impact all of your toilets. There is an ideal range of water pressure for flushing a toilet. The toilet won’t function if the water pressure in your house is lower than the minimum required by the manufacturer.

Repair Toilet Water Flow
When your unsure a plumbing expert will be able to help diagnose and fix your issue.

Toilet Not Filling FAQs

Should I call a plumber to fix my toilet not filling up?

In the event that you are unable to get the water tank of the toilet refilled correctly, calling a professional plumber becomes your best alternative. This indicates that you have a significant issue either within your toilet or with something farther inside the pipes. You can experience a variety of issues that may arise within your toilet, including but not limited to the tank not being filled properly.

The correct operation of a toilet is dependent on the cooperation of several different components. It’s possible that an issue with the plumbing or the components that make the toilet operate might be the cause of a toilet that doesn’t flush correctly. Even if some of the components of a toilet are broken, it may still be able to flush sometimes.

When a toilet’s components begin to fail, they should be changed immediately, despite the fact that it may be enticing to overlook the problem. They are at risk of failing if you do nothing. Toilet components that aren’t working properly may waste money and drive up your utility costs, regardless of whether the toilet doesn’t end up breaking totally.

How does a toilet fill up with water after you flush?

With each operation of the toilet’s flush handle, its tank fills with water for flushing away all of the waste. You may be certain that there will never be a backup of water within the tank of your toilet thanks to the overflow tube.

It usually takes a toilet anywhere from ten to fifteen seconds to replenish itself and cease flowing after it has been flushed. This allows the tank to be filled up to the toilet’s overflow tube before it flushes.

Should I call a plumber to fix my toilet tank not filling with water after flushing?

Toilets that are leaking or operating incorrectly may waste several hundred gallons of precious water every single day. You will know that there is an issue with the toilet if the water tank does not refill with water when you flush the toilet.

You are not only wasteful with water, but you are also paying for the water that you waste. This reason alone should be why you ought to call up a skilled plumber to diagnose and fix the problem within your toilet.

Hire a Local Plumbing Pro

The methods above are effective DIY tips to investigate, diagnose, and resolve issues with your toilet not filling up properly. However, if you require professional assistance, don’t hesitate to reach out to a local plumbing expert using the contact information provided on this page.

Get a Quote

Let’s connect you to a top-tier local service professional

Contact Us Today for a Quote

or Call (833) 933-1722

Thank You!

Your project has been sent to a top-tier local service provider who’ll be in touch soon to take the next steps.

or Call (833) 933-1722